Are you peering with interface IPs or Loopback IPs? Regards, Peter Nyamukusa - CCIP, JNCIS, MCSE, Linux+ Technical Manager Africa Online (T) Ltd Tel: +255 (22) 211 6090 Fax: +255 (22) 211 6089 Email: [EMAIL PROTECTED] AIM: petenya
A member of the Telkom South Africa Group -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of C and C Dominte Sent: Monday, October 06, 2008 5:22 PM To: [email protected] Subject: [?? Probable Spam] [c-nsp] BGP over Etherchannel Issue Hi all, I am having a rather unusual issue, and I have no idea on how or where to find any info about it. Basically, a bgp session configured over an etherchannel (2x10G ports) goes down, if one cable is removed. This should not happen under normal circumstances, as the physical disconnection, should not affect the Etherchannel operation, as long as there is at least one connected port in operation. The IP addresses are configured over a VLAN, which is then allowed on the etherchannel trunk. When I removed one of the two fibers, the bgp session went down, and in the reset log the reason was peer closed the session, on both sides. Any help would be appreciated. Catalin _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
