On Tue, Oct 14, 2008 at 11:02:21PM +0200, Peter Rathlev wrote: ... > > This would be SVI mode "EoMPLS", where one would expect local switching. > Remember that "interface Vlan1005" isn't the same as "vlan 1005". It > would be VERY nice if the PFC3 could do this, but unfortunately it > can't. You need more expensive equipment for that. :-) > ...
A dirty hack can be done to have VLAN-based EoMPLS without expensive cards. Just configure an additional VLAN on the box, assign a port to it and connect this single port in the new VLAN to a port the VLAN for which you want to have VLAN-based EoMPLS with a short cable. Then do PORT mode EoMPLS on this single port. Did not try it myself but according to my SE this is used by some customers. hth reinhold _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
