Dears, We're configuring EIGRP on both sides, customer and ISP. The customer router are dumping the following logs. Here's an example of some logs ..
128326: Oct 6 02:48:05.387 CDT: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 100: Neighbor 10.253.225.38 (GigabitEthernet1/31.101) is up: new adjacency 128327: Oct 6 02:48:05.435 CDT: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 100: Neighbor 10.253.225.38 (GigabitEthernet1/31.101) is down: K-value mismatch 128328: Oct 6 02:48:19.519 CDT: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 100: Neighbor 10.253.225.38 (GigabitEthernet1/31.101) is up: new adjacency 128329: Oct 6 02:57:37.414 CDT: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 100: Neighbor 10.253.225.38 (GigabitEthernet1/31.101) is down: holding time expired 128330: Oct 6 02:57:41.210 CDT: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 100: Neighbor 10.253.225.38 (GigabitEthernet1/31.101) is up: new adjacency 128331: Oct 6 02:58:46.495 CDT: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 100: Neighbor 10.253.225.38 (GigabitEthernet1/31.101) is down: holding time expired 128332: Oct 6 02:58:50.655 CDT: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 100: Neighbor 10.253.225.38 (GigabitEthernet1/31.101) is up: new adjacency 128333: Oct 6 02:58:52.699 CDT: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 100: Neighbor 10.253.225.38 (GigabitEthernet1/31.101) is down: K-value mismatch 128334: Oct 6 02:58:57.623 CDT: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 100: Neighbor 10.253.225.38 (GigabitEthernet1/31.101) is up: new adjacency 128335: Oct 6 02:59:36.491 CDT: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 100: Neighbor 10.253.225.38 (GigabitEthernet1/31.101) is down: holding time expired 128336: Oct 6 02:59:44.327 CDT: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 100: Neighbor 10.253.225.38 (GigabitEthernet1/31.101) is up: new adjacency Can anybody assist ? Best Regards, Mohammed Dado Technical Support Engineer - EMEA Airspan Communications Ltd [cid:identifierFooterImage]
_______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/