Hi, I'm running multicast routing with sparse-dense-mode and I'd like to filter out some of the addresses, I've created a standard access list permitting the multicast addresses i want to be routed out and then a deny any at the end.
I've applied it to the interface using the ip igmp access-group <ACLNAME> command but it doesn't seem to be affective, the end hosts are still receiving the multicast streams which i've attempted to filter out. The hardware is a 6500 (catos) with a sup2, the configuration looks like so on the first switch: interface vlan999 ip address 192.168.99.254255.255.255.0 ip pim sparse-dense-mode ip igmp access-group multicast ip access-list standard multicast permit 239.255.1.1 deny any The end host is on a 3750, I tried applying the access-list and ip igmp access-group statement to the vlan interface where the end host is and the multicast traffic that I wish to be filtered is still coming over. Am I doing something terribly wrong here for it not to work? Thank you for your time. W _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
