Just change your A end to use dynamic map. http://www.cisco.com/en/US/products/sw/secursw/ps2308/products_configuration _example09186a0080094680.shtml
Luan Nguyen Chesapeake NetCraftsmen, LLC. www.NetCraftsmen.net -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of William Sent: Thursday, November 06, 2008 6:04 AM To: cisco-nsp Subject: [c-nsp] PIX 6.x Site2Site with dynamic IP? Hi Chaps, I use to have a VPN tunnel running between two sites using Cisco Pix 6.x, the B end now has a dynamic IP address every time the router reloads which means the tunnel has gone down and to get it back up we have to reconfigure a ISAKMP key and change our config here on the A end. Is there a way I can get round this? the router infront of our B-end PIX is not Cisco nor is it under our control. My client downgraded their Internet Service package which also meant that they now have a dynamic IP address :( Thanks for your time. W _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
