Hi All I was playing around with an ip unnumbered config for our Dist-layer.
I got a working config on a 3560 ie int loopback 10 ip address x.x.x.x y.y.y.y Vlan x ip unnumbered loopback 10 Vlan x1 ip unnumbered loopback 10 Vlan x2 ip unnumbered loopback 10 The same wont work on 3750 which gives the following when inputing the "ip unnumbered" command. Point-to-point (non-multi-access) interfaces only My question is, is there a work around for this or will 3750 never support "ip unnumbered" on multi-access interfaces? Best regards Mattias Gyllenvarg Omnitron _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/