Check for MTU size on interfaces. Regards
Hitesh Vinzoda On 11/10/08, Mohammad Khalil <[EMAIL PROTECTED]> wrote: > > > Dears > i have the following setup: > CE1 --> PE1 --> MPLS Cloud --> PE2 --> CE2 > PE1 is 7609 and has the IOS image > c7600rsp72043-advipservices-mz.122-33.SRD.bin > PE2 is a VXR G2 and has the IOS image > c7200p-spservicesk9-mz.122-33.SRC1.bin > CE1 --> PE1 is ATM connection > CE2 --> PE2 Vlan connection (Sub interface) > > i have established xconnect between the 2 sides > the xconnect is up and there is a ping between the 2 sides > but the problem is in the size > when i issue the command ping x.x.x.x repeat 1000 size 1500 > i face remarkable packet drop !! > any ideas ?? > knowing that there is no congestion at all in my links nor through the MPLS > cloud > > _________________________________________________________________ > News, entertainment and everything you care about at Live.com. Get it now! > http://www.live.com/getstarted.aspx > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/