Brian, This should be a good start. It has been a long time since I did this.
-- http://dcp.dcptech.com > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:cisco-nsp- > [EMAIL PROTECTED] On Behalf Of Brian Raaen > Sent: Tuesday, November 11, 2008 11:27 PM > To: [email protected] > Subject: [c-nsp] Setting up Cisco 1811 for dial in access > > I am trying to set up a Cisco 1811 for ppp dial-in access for a client > and am > having difficulty finding configuration information. Most of the > documentation I find is about using the router to dial out to support > the > network, but I am trying to do the opposite. I am trying to set up the > router to provide access to the local network through a ppp dial in > connection. Thank you for your help. > > > ---------------------- > > Brian Raaen > Network Engineer > [EMAIL PROTECTED] > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
