AFAIK for VPLS you will need an ES20 card or SIP400 card. with 6500 and LAN cards you can only configure edge of H-VPLS with xconnects under physical interfaces (not under SVIs).
On Fri, Nov 21, 2008 at 3:39 PM, Phil Mayers <[EMAIL PROTECTED]>wrote: > Suzan S. wrote: > >> Dears,Iam trying to configure VPLS on 6509 with SUP-720, is there a >> limitation on the modules which support VPLS. The xconnect is >> configured on interface vlan for the giagethernet port.IS there any >> solution to get the vfi UP?Thank you >> > > VPLS requires WAN cards i.e. SIP-400. > > "Normal" 6500 linecards i.e. LAN cards can only do point-to-point EoMPLS > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/