Hi Peter,
> Subinterfaces use "internal VLANs" and are not switched like other > VLANs. If you were using the VLANs as regular switchport VLANs on a > trunk, they wouldn't consume "internal VLANs", but subinterfaces do. So the command 'show platform hardware capacity vlan' should be tracking the free internal VLANs, but this is not happening: 7609#show platform hardware capacity vlan VLAN Resources VLANs: 4094 total, 68 VTP, 0 extended, 16 internal, 4010 free As subinterfaces use "internal VLANs", I am actually using 18 internal VLANs here. It seems this command is only tracking the "internal VLANs" in the range 1006-4094 (automatically allocated by IOS). Am I missing anything? Regards, Leonardo. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/