A dial peer pots cannot have a codec You need to place it the voip dial peer. The defualt codec is g729 , you can change it by setting a default codec clas using voice class codec
Regards Brian -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Aljula Hasa Sent: mercoledì 14 gennaio 2009 12.32 To: [email protected] Subject: [c-nsp] Stream Association Failed: Requested codec=0x5=g711ulaw,Negotiated codec=0xFFFFFFFF=No Code Hi, I am trying to run TCL IVR v2.0 script. The voice/audio is not heard. TCL IVR application seems to run ok but don't hear voice for the reason Stream Association Failed: Requested codec=0x5=g711ulaw, Negotiated codec=0xFFFFFFFF=No Code. How to set codec g711ulaw in gateway? The dial-peer is pots. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
