Thanks.... Would anyone from the SP area like to add any comments? ________________________________
From: Brad Hedlund [mailto:[email protected]] Sent: Wed 1/14/2009 12:49 PM To: Scott Ingram; [email protected] Subject: Re: [c-nsp] BGP default-originate route On 1/14/09 11:19 AM, "Scott Ingram" <[email protected]> wrote: > I think to keep it simple > all I want is to do "one site primary and the other standby only". Scott, I'm sure the SP guys will jump in at this point but that should be a fairly straight forward setup, where the standby site's PE is configured to crank up the metric for the default route from that location, such as padding ASN or manipulating MED, or any other BGP setting. Cheers, Brad Hedlund [email protected] http://www.internetworkexpert.org <http://www.internetworkexpert.org/> IMPORTANT NOTICE: This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you have received this message in error, you are hereby notified that we do not consent to any reading, dissemination, distribution or copying of this message. If you have received this communication in error, please notify the sender immediately and destroy the transmitted information. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
