Hi, the PA-MC-STM1 can be configured for SDH or Sonet framing on the controller, below which the TUG structure (don't know how's that called in Sonet) is configured. As far as I know (only done SDH for some time) when switching to Sonet we're in OCx world.
I've no installed PA at hand without links conencted so maybe someone can simply try what can be configured when in Sonet mode ? regards, Marcus > -----Ursprüngliche Nachricht----- > Von: [email protected] > [mailto:[email protected]] Im Auftrag von Gert Doering > Gesendet: Montag, 2. Februar 2009 18:47 > An: Justin M. Streiner > Cc: [email protected] > Betreff: Re: [c-nsp] Channelized OC3 for 7206VXR > > Hi, > > On Mon, Feb 02, 2009 at 11:29:42AM -0500, Justin M. Streiner wrote: > > That particular card does not support channelized > operation. It's also > > end-of-life. I'm not aware of a channelized OC3 port > adapter for the 7200 > > series. > > For whatever reason, there is a channelized STM-1 which goes > down to E1, > but no channelized OC3 indeed. > > gert > -- > USENET is *not* the non-clickable part of WWW! > > //www.muc.de/~gert/ > Gert Doering - Munich, Germany > [email protected] > fax: +49-89-35655025 > [email protected] > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
