Hi, I'm having a bgp issue I can't figure out and hoping someone has ran into this.
I have two routers, router A and router B doing bgp. Router A is advertising 5 routes to router B, when the session 1st comes up, router B has 5 routes received from router A. After 1:15 min the learned routes on router B disappear. Router A Learns the routes from one of my bgp customers. neighbor 2xx.xx.xx.xx description xxx neighbor 2xx.xx.xx.xx update-source FastEthernet1/43 neighbor 2xx.xx.xx.xx default-originate neighbor 2xx.xx.xx.xx prefix-list PxxPL-IN in neighbor 2xx.xx.xx.xx route-map PLIN in neighbor 2xx.xx.xx.xx filter-list 109 in neighbor 2xx.xx.xx.xx filter-list 2 out neighbor 2xx.xx.xx.xx remote-as xxx neighbor 2xx.xx.xx.xx update-source Loopback0 neighbor 2xx.xx.xx.xx next-hop-self it advertises them to the configured neighbor on router A neighbor 216.xxx update-source Loopback0 neighbor 216.xxx next-hop-self neighbor 216.xxx filter-list 1 in neighbor 216.xxx filter-list 1 out If I clear the bpg session or when the session 1st comes up on router B, I see the routes but then they disappear after 1:15 min. Thanks PA _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/