Hello list,
I tried to set up an ospf connection between one access Cisco router (CE) and
Redback routers (PE) in lab. But the It stucks in Exchange state.
Debug messages shows EXCHANGE - OPTIONS/INIT not match
The Pcap shows DBD bits mismatch. Any idea to change I and MS bis in Cisco
router 1841.
cisco
DB Description: 0x02 (M)
.... 0... = R: OOBResync bit is NOT set0
.... .0.. = I: Init bit is NOT set
.... ..1. = M: More bit is SET
.... ...0 = MS: Master/Slave bit is NOT set
Redback
DB Description: 0x07 (I, M, MS)
.... 0... = R: OOBResync bit is NOT set
.... .1.. = I: Init bit is SET
.... ..1. = M: More bit is SET
.... ...1 = MS: Master/Slave bit is SET
Thanks,
Judy
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
