Antonio Soares wrote:
Since you don't have a "boot system flash" statement in your config, you need a
config-register = 0x2101. This way it will load the
first available image in the bootflash.
Regards,
Antonio Soares, CCIE #18473 (R&S)
amsoa...@netcabo.pt
Just recently we had an issue where a 4924 wouldn't load our desired IOS
image under any combination of "boot system {flash:|bootflash:} commands
we could think of. Only solution was to erase all but the desired image.
It was a roll the dice hope you don't critically fail situation.
Config register 0x2101.
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/