Hi guys
I copied a file to slavedisk0: on a 6513-sup II board. when I try to use
verify slaveslot0:filename I get this error output
%Error verifying slaveslot0:c6sup22-jk2sv-mz.121-22.E2.bin (Bad file number)
the disk was formatted in this switch and the file copied without problems.
The issue is that i'm trying to upgrade the IOS to the new one in flash and it
can't load.
I also would like to know the difference between disk0: and slot0:, i don't
fully understand it, if any.
thanks in advance
Alejandro
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
