I have an issue that I cannot work out. I had all my policing statements working, when I had my asa's plugged into an old 6509 via a fiber port that was trunked on both ends and the ports that the asa's were plugged into were normal switch ports.
I have now plugged them directly into the new 6509 and now I am only getting policing on downloads only. policy-map 8_Mb_Internet class class-default police cir 8388500 bc 265625 be 265625 conform-action transmit exceed-action drop violate-action drop interface GigabitEthernet5/8 switchport switchport trunk encapsulation dot1q switchport mode trunk no ip address mls qos vlan-based interface Vlan16 ip address 10.1.16.2 255.255.255.0 ip access-group Productions in ip helper-address 10.1.6.10 no ip redirects no ip unreachables ip flow ingress ip route-cache flow no ip mroute-cache mls netflow sampling standby 15 ip 10.1.16.1 standby 15 priority 250 standby 15 preempt service-policy input 8_Mb_Internet service-policy output 8_Mb_Internet Any ideas what could be causing the qos to police only downloads and not up loads ? _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/