Thank you so much :) Regards,
Serhat -----Original Message----- From: Peter Rathlev [mailto:pe...@rathlev.dk] Sent: 05 Mart 2009 Perşembe 12:57 To: Serhat Candan (Probil - İstanbul) Cc: cisco-nsp@puck.nether.net Subject: Re: [c-nsp] Cisco 7600 Router's Default IPSec Throughput Rate On Thu, 2009-03-05 at 10:25 +0200, Serhat Candan wrote: > Thanks for reply. I checked the topic it is about IOS support, i need > some charts about IPSec throughput, pps etc. Then read the thread once more. :-) If it is not supported the throughput you can rely on is exactly 0. If you need IPSec for other than management purposes (or on SR) you need an IPSec SPA. Regards, Peter _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/