> Please help me to understand, if there are redundant SUP32-10GE's > in chassis, is it possible to use all 4 10G ports at wire speed > simultaneously? What type of interconnection do supervisors use > between them?
All four ports can be used at the same time - however, they will be oversubscribed 2:1 on each supervisor. There is also a limit at 15mpps ipv4 traffic (64-byte packets). The SUP32 connects to the classic bus - that is the shared 32gbps bus, which is also used between the two supervisors. This means that a SUP32-system cannot forward more than 32gbps in total, no matter which linecards you use. -- Håvard Staub Nyhus _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/