On Friday 06 March 2009 22:23:17 Charles Wyble wrote: > I recently purchased some cisco gear for my lab. One of the things I am > doing is configuring a Catalyst 5505 with a Route Switch Module (RSM). > > Any idea how to reset the config to factory defaults? I bought it second > hand and need to clear the configs as I don't know the password.
http://www.cisco.com/en/US/products/hw/switches/ps686/products_password_recovery09186a00801d1248.shtml Connect to the female DB-25 on the RSM itself and send the BREAK sequence (with Minicom under Linux, for instance, this is CTRL-A F or ALT-F, depending on version and console) right after you see the ROMMON banner. -- Lamar Owen Chief Information Officer Pisgah Astronomical Research Institute 1 PARI Drive Rosman, NC 28772 http://www.pari.edu _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/