You can't use "permit any" because it would match any route in the IP routing table (including the connected interfaces). The access list used in NON-EXIST-MAP is used on the IP routing table, not on the BGP table (that's why the AS path doesn't work either).
Ivan > -----Original Message----- > From: Burak Dikici [mailto:bdik...@gmail.com] > Sent: Sunday, March 15, 2009 7:16 PM > To: Mateusz Blaszczyk > Cc: cisco-nsp@puck.nether.net > Subject: Re: [c-nsp] BGP conditional advertisemet - NON-EXIST > route map'saccess-list problem > > Hi Mateusz , > > For better understanding , i have attached the topology > screenshot and the router's configuration files. (By the way > , this is a lab config.) > > In the attached Router's configuration , > > access-list 65 permit 172.16.1.0 0.0.0.255 > > command is used and with this command bgp conditional > advertisement is working fine. > > But when i use , > > access-list 65 permit any > > command , the conditional advertisement doesn't work. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/