Hello! Could anybody explain me how exactly IOS choise which module to disable if system run in combined power mode and one of power inputs failed?
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/pwr_envr.html#wp1020384 However, if one power supply fails and there is not enough power for all of the previously powered-up modules, the system powers down those modules. Could I do some pre-configuration to point IOS to modules "less critical" for me? P.S. 12.2(33)SRC3, C7609-S, dual PS -- Dmitry Kiselev _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/