Hello,
I have enabled traffic engineering support in my domain. My setup is like. (Cisco)------Gig-------(Juniper1)-------FE-------(Juniper2). When I see the entries at Cisco in the TE-DB that were built from LSAs sent by Juniper2, it shows me igp metric as "IGP metric:invalid". I am unable to find any reference material on this issue any help will be highly appreciated. ---------------------------------------------------------------------------- -------------------------------- IGP Id: 192.168.96.251, MPLS TE Id:192.168.96.251 Router Node (ospf 10 area 0) id 53 link[0]: Broadcast, DR: 192.168.85.249, nbr_node_id:124, gen:22637 frag_id 4, Intf Address:192.168.85.250, Nbr Intf Address:0.0.0.0 TE metric:10, IGP metric:invalid, attribute flags:0x0 SRLGs: None physical_bw: 1000000 (kbps), max_reservable_bw_global: 1000000 (kbps) max_reservable_bw_sub: 0 (kbps) Global Pool Sub Pool Total Allocated Reservable Reservable BW (kbps) BW (kbps) BW (kbps) --------------- ----------- ---------- bw[0]: 0 1000000 0 bw[1]: 0 1000000 0 bw[2]: 0 1000000 0 bw[3]: 0 1000000 0 bw[4]: 0 1000000 0 bw[5]: 0 1000000 0 bw[6]: 0 1000000 0 bw[7]: 0 1000000 0 ---------------------------------------------------------------------------- -------------------------------- Regards, AHQ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/