Michael Robson wrote: > The circuit supplier quoted dB values for the links on handover which > should have meant that most of the links would have been within > acceptable values: perhaps the 6500-quoted values aren't very accurate?
If you haven't done so, meticulously clean the optics, cables, ferrules. It can make quite a difference, and should really be standard procedure when doing anything with singlemode imho. Also worth testing with a lightmeter as part of the installation process. <plug> We are hopefully going to have a presentation on this at a future UKNOF later this year - see www.uknof.org.uk </plug> Will _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/