List,
I'm in the process of bringing up my first SONET APS-protected
(single-router APS) link, and it's been an adventure. Aside from the
carrier having to tickle their DACS cross-connect to get the circuit to
work, and learning that I needed to use the Loopback0 address as the APS
protect address, and then learning that I needed to allow UDP/1972 in my
receive ACL (I guess I figured something had to be allowed), the link is
now up. IPv4 and IPv6 OSPF adjacencies are up, and the working port is
showing 1-2kbps of traffic.
Unfortunately, MRTG is only seeing 16bps on one port, and 0bps on the
others. Is there something special to tracking the traffic on an APS pair?
Pete
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/