I set the interfaces between the two 7206's at POP H as well as the GigE backbone link to mpls mtu 1530, and everything worked.
Thanks all. Chris On Mon, Jun 1, 2009 at 4:35 PM, Gert Doering <[email protected]> wrote: > Hi, > > On Sun, May 31, 2009 at 11:22:08PM +0200, Sascha E. Pollok wrote: > > Also, what kind of FE boards do you use on the 7206? > > I am currently unsure whether e.g. PA-FE-TX support > > larger MTUs needed for MPLS/VPN. > > "Sort of". There was a lengthy discussion on this list, about two years > ago - as far as I remember, the single-port FEs for the 7200s are bugged > and can only do an MTU up to 1530 bytes. > > ... but this still works nicely for simple L3 VPN stuff (1500+4+4). > > gert > -- > USENET is *not* the non-clickable part of WWW! > // > www.muc.de/~gert/ <http://www.muc.de/%7Egert/> > Gert Doering - Munich, Germany > [email protected] > fax: +49-89-35655025 > [email protected] > -- ------------------ Chris Hale [email protected] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
