Hi,
Is anyone able to confirm whether the onboard X2 slots on the 4900M
support the twin-gig modules?
Some of the documentation suggests they are only supported on the 8-Port
(2:1) 10 Gigabit Ethernet (X2) Half Card, but I haven't seen any that
definitively rules out there use on the onboard slots.
Thanks,
Sam
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
