You can't use reload at to meet your needs?
Jared Mauch
On Jun 24, 2009, at 8:25 AM, David Freedman
<david.freed...@uk.clara.net> wrote:
Am trying to reload a low end IOS device (c800 in this case) without
displaying a confirmation prompt.
My issue is that the platform needing to issue the command can not
"see"
the VTY output so could not be expected to respond to a confirmation
prompt, looked in vain for some kind of "/noconfirm" flag but didn't
find one...
Does not appear to be possible with SNMP (even though it accepts the
snmp-server shutdown command).
My current solution is to use an EEM applet called manually with a
single action of "reload" , unfortunately this only applies to 800
images with EEM (I would guess ADV images only)
Anybody come up with a better solution?
TIA
Dave.
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
