I have a RAC 2xnodes (CRS) setup behind a NAT Firewall (IP nating 1:1), when the clients connect to DB they only connect to first IP and not using the second IP. How should I configure my RAC/NAT/TNSnames to give the clients the option to connect both IP's inorder to have Load balance? since am not able to get the clients to swap between the 2x nodes
The NAT is made on a ROUTER R1#sh ver Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3660-IK2O3S-M), Version 12.0(7)XK1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) TAC:Home:SW:IOS:Specials for info Copyright (c) 1986-2000 by cisco Systems, Inc. Compiled Fri 17-Mar-00 19:37 by phanguye Image text-base: 0x60008900, data-base: 0x611AC000 ROM: System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1) ROM: 3600 Software (C3660-IK2O3S-M), Version 12.0(7)XK1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) on the clients: node= (DESCRIPTION = (FAILOVER=ON) (LOAD_BALANCE=YES) (ADDRESS = (PROTOCOL = TCP)(HOST = 10.5.1.X)(PORT = 1521)) (ADDRESS = (PROTOCOL = TCP)(HOST = 10.5.1.Y)(PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = CO) (FAILOVER_MODE=(TYPE=SELECT)(METHOD=BASIC)) ) ) on the server: ########## Public Network ############## 10.4.1.X node1 10.4.1.Y node2 ########## Virtual IP Address ######## 10.4.1.XX node1_vip 10.4.1.YY node2_vip regards, madunix _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/