I was wondering the reasoning for routers/switches to respond for the network portion of an ip-address range.
For example, a router interface A with 10.0.0.1/30 and interface B with 10.0.0.5/30. Generate a ping from a device several hops away on the A side to the B side network address of 10.0.0.4. The router will respond with an echo reply with an address of 10.0.0.1. Is this expected behaviour? And the reason? Ray -- Scanned for viruses and dangerous content at http://www.oneunified.net and is believed to be clean. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/