Hi,
I've read:
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/prod_white_paper0900aecd80673385.html
If I'm understanding this correctly, communication between each bank of
8 ports on a 6716-10G will be line-rate, but communication between the
first and second groups of 8 ports will need to traverse the switch fabric?
On a similar note, if I create an etherchannel between two 6716-10G's
will a module favour forwarding out of it's locally attached channel member?
Regards,
Sam
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/