Multiple sups per chassis are not supported. From access to core, since VSS
looks like one chassis, you would do 1 uplink to each physical 6500.
Cisco's data sheet:
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps9336/product_data_sheet0900aecd806ed759.html
Want to get into the weeds a little? How about some tasty config guide?
http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/vss.html
tv
----- Original Message -----
From: "Jeff Kell" <[email protected]>
To: "'NSP List'" <[email protected]>
Sent: Tuesday, July 28, 2009 9:06 PM
Subject: [c-nsp] VSS question...
Excuse the naive question, just starting to look at VSS and trying to tune
to the concept...
For those of you that have dived into VSS... are you still doing
redundant supervisors per chassis? or just duplicating links on each
chassis and crossing your fingers?
I've done the 3750 stacks and perhaps locked my thinking into designing
with a complete chassis failure being "tolerable" in the end design. Does
this scale up to VSS, or just a matter of how many ports can you afford to
drop?
Jeff
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
