Dean Smith <> wrote on Thursday, July 23, 2009 22:54: > Is there any tweak, trick or feature that enables a route-reflector > to pass on multiple iBGP paths to clients ? > > This is for a straightforward iBGP ipv4 setup (no multiprotocol bgp > or MPLS, so no unique VRF ids etc).
until add-path is available (not sure about roadmap), you can build two RR planes, and try to keep the individual paths on separate planes. So RRs in plane A don't peer with RRs in plane B.. It requires manual policies (to send paths from a RR-client to the "right" plane with the "right" metric), so it's not a general solution. oli _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/