I vaguely recalled the 7200VXR/G2's requiring the "fancy" DOM SFPs, not the regular GLC- SFP's. A little Googling turned up this:
http://www.cisco.com/en/US/prod/collateral/routers/ps341/prod_qas0900aecd80471791.html "Q. Which SFP modules are supported on the Cisco NPE-G2? A. The following SFP modules are supported: SFP-GE-S, SFP-GE-L, and SFP-GE-Z" Could be that your GLC-LH-SM isn't supported, and you need to buy the SFP-GE-L instead... http://www.cisco.com/en/US/docs/routers/7200/install_and_upgrade/gbic_sfp_modules_install/5067g.html#wp90313 -Geoff On Thu, Jul 30, 2009 at 11:06 AM, RAZAFINDRATSIFA Rivo Tahina<r.tah...@moov.mg> wrote: > Hi all, > > I use > 1000BASE-LX/LH (GLC-LH-SM), on both Catalyst and 7206 NPE-G2, interface and > protocol are up but I cannot do anything, what am I missing? > > Regards. > _______________________________________________ > cisco-nsp mailing list cisco-...@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/