You can configure the PIX for local and remote subnets using your interesting traffic ACL.
Access-list vpn_myacl permit ip <local address> <mask> <remote address> <mask> The PIX can be configured from the outside using PDM: http <outside address> <mask> outside hth -ryan -----Original Message----- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Deric Kwok Sent: Tuesday, August 11, 2009 9:10 PM To: cisco-nsp@puck.nether.net Subject: [c-nsp] vpn configure Hi How can I configure remote subnet and local subnet for vpn in cli? ls pix only accessed by https in inside for configuration? No other way for http configuration outside? Thank you _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/