I have a telco that wants to hand me an OC3 on which there will be 3 DS3's, all doing different things. One will be a clear channel (pt-pt) DS3, one will contain 28 T1's in the DS1 time slots of the DS3, and one will be unused for the time being.
I want to buy a PA card to use in a 7200VXR and found the single-mode fiber one PA-POS-OC3SMI. My question is will this card allow me to take the T1 timeslots of the #2 DS3 and use them like I do elsewhere in a PC-MC-T3 card? Ala: ! ! 1 Channelized T3 port(s) ! controller T3 1/0/0 t1 1 channel-group 0 timeslots 1-24 t1 2 channel-group 0 timeslots 1-24 t1 3 channel-group 0 timeslots 1-24 Etc.etc. If I can use DS3 #1 as a pt-pt serial interface and DS3 #2 as a Chan. DS3 for T1's that would be awesome, that's what I'm looking for. I want to stay away from getting a separate MUX to break the OC3 down into DS3's to feed to separate PA cards if I can help it. Thanks, CJ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/