Hi Scott, On Mon, 2009-08-17 at 15:30 -0700, Scott Granados wrote: > Hi, I'm having an issue binding more than one map to the outside > interface so I need someone to set me straight.:) > > Background > > I have an ASA 5520 that's providing access to a private network via > the Cisco VPN client. I wish to establish a few LAN-to-LAN sessions to > branch offices using the same concentrator. > > Problem, when I apply one map to the outside interface the previously > added map is removed.
This is "by design". :-) You can only use one crypto map per interface. To define more than one peer you need to use the serial ("crypto map <name> <serial>") to differentiate them. Remember that the dynamic map should be in the very end of the crypto map definition. http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/ike.html Regards, Peter Rathlev _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/