Hi, > We have 24 port 100FX MM boards WS-X6324-100FX-MM in a 13 slot chassis, > and none of these modules come up all the way with SXI1 or 2. > > In Version 1 the modules were not even recognized yet were a supported > device. In rev 2 they are recognized and indicate that they pass the > diags after reload, but the status of module stays in OTHER and ports > are non functional. > > The fix was suppose to be in rev SXI 2. > > Has anybody else seen this?
I always check the release notes - expecially for older line cards support depends on the supervisor being used from the looks of things - http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/release/notes/ol_14271.html#wp2563690 alan _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/