Thanks - didn't know about that ;) I think we'll end up moving to Radius anyways - just makes better sense ....
Take care, Paul -----Original Message----- From: John Kougoulos [mailto:k...@intracom.gr] Sent: August-31-09 9:30 AM To: Paul Stewart Cc: cisco-nsp@puck.nether.net Subject: Re: [c-nsp] VPN Auditing have you enabled "crypto logging session" ? On Thu, 27 Aug 2009, Paul Stewart wrote: > Hi folks... > > > > We have a site that runs a Cisco 2800 with a IOS VPN server. Users connect > via their Cisco VPN clients to gain access to an internal network there... > > > > I would like to start auditing it a bit more and have a way to tell who > logged in and when. Is this difficult? I've searched around and found more > complex things that can be accomplished but currently the security policy > only permits user authentication auditing. The users are currently > authenticated off a local configuration - would moving them to Radius make > more sense or can I do this with builtin usernames? > > > > Best regards, > > > > Paul > > > > > > > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/