On 2009-09-09, at 04:56, Bjørn Mork wrote:
Joe Abley <jab...@hopcount.ca> writes:
interface FastEthernet0/1
description facing the exchange point
bridge-group 1
bridge-group 1 output-pattern-list 1100
And this access list does allow e.g. IPv6 multicast frames?
That access list is just cleaning frames being sent to the exchange to
make sure that weird crap doesn't leak over there. The exchange point
in question only permits one nominated MAC per port, and will shut
down the port automagically if it hears more.
access-list 1100 permit 0023.9c72.d700 0000.0000.0000 0000.0000.0000
ffff.ffff.ffff
That's the complete list, as configured.
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/