Jason Lixfeld wrote:
3- There is one device on the network (an ASR1002 running 2.4.0) that is unable to see the loopback address via OSPF from this 7600 we just upgraded. It's built an adjacency with the 7600, so it's not an MTU thing, it just doesnt see the route for it's loopback interface.
Make sure the ospf network mode on the interface (ip ospf network broadcast/point-to-point etc) is set correctly and to match the neighbor settings. - Kevin _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/