On Monday 21 September 2009 08:32:14 pm Derick Winkworth wrote: > 12.4(15)T10 > > Its the third or fourth bug-fix only release in the > 12.4(15)T line of code... > > You have a lot of features you want to enable... I would > try this one first..
Before we started out with SRC, we evaluated a single code base that we could run on both our NPE-G1's and below, as well as the NPE-G2's and 7201's. Needless to say, as do most folk, we tried to stay away from the T train, despite the fact that aside from SRC, 12.4T and 12.4XD were the only other trains that supported the NPE-G2 and 7201 platforms. Moreover, we wanted BFD, and it seemed that only SRC (and now, SRD too) provided support for this across all interface types, including WAN's, i.e., Frame Relay, POS, Serial, ATM, e.t.c. Our decision was clear after that. SRC has quite a comprehensive feature set, and because we can run it across the NPE-400, NPE-G1, NPE-G2 and 7201, it made for a great choice with us. Cheers, Mark.
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
