Hard to say. But, I usually start with cabling then the optics.
tv
----- Original Message -----
From: "Keith" <[email protected]>
To: <[email protected]>
Sent: Monday, October 26, 2009 1:02 PM
Subject: [c-nsp] 3560 MM SFP.
Have a MM SFP in gig 0/1 of a 3560.
Seeing lots of input errors on the gig port of the 3560.
Other side of the fiber link is in a 7206vxr. The 7206 side of the fiber
link is fine. No input/output error, no drops etc.
# sh controllers ethernet-controller gig 0/1
<snip>
133609743 Symbol error frames
89134 Invalid frames, too large
0 Valid frames, too large
14929952 Invalid frames, too small
0 Valid frames, too small
Is this indicitive of a bad SFP?
Thanks.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
