Hello all, We have a strange issue between PIX 501's running and our 800 series routers, we are using verious 800s with a spread of IOS versions. The problem manifests itself as a drop of connectivity between the two devices, that being we lose layer 3 forwarding out of the switch-port module on the 800.
We are of the opinion we have ethernet connectivity between devices as the mac-address table is being populated after being cleared, and linkstate show up/up but we cannot ping, nor can the device ARP for the PIX. Static ARP entrys also no not fix the issue, the only way we have found so far to fix the problem is to reboot the 800. Has anyone experienced this kind of problem before? Regards -- _ Chris Nicholls ASCII ribbon campaign ( ) Timico Network Operations - against HTML, vCards and X ch...@timico.net - proprietary attachments in e-mail / \ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/