During a high network usage event, the cpu load increased to 90% sustained, while a 'show processes cpu' did not reveal any culprits. I suspected IP Input may be consuming a high amount of cpu, but it was only at 2.7%
The 3550 is working as a L3 router with two static entries for the default gw (for load balancing on our uplink). Traffic levels at the time of the high cpu usage were ~120Mbps. I also examined broadcast packet counts and traffic destined for the router itself. They also did not reveal anything out of the ordinary. Do you have any suggestions on what I should be looking at to determine the source of the high cpu usage? Thank you, Hector _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
