So, what is the difference in output from doing exec-on vs attach? You are still connecting via the same method.
On Mon, Nov 16, 2009 at 14:07, e ninja <eni...@gmail.com> wrote: > Antonio, > > You should *never* troubleshoot fabric errors with *any* exec-on commands. > They run over the fabric that may or may not be compromised. > > 1. Are any other LCs apart from slot 6 reporting CRC errors? > 2. grab two "sh contr fia" from the RP and an attach to all the LCs and > send over. > > Eninja > > > On Mon, Nov 16, 2009 at 4:15 AM, Antonio Soares <amsoa...@netcabo.pt> > wrote: > > > Hello group, > > > > I have a 12k reporting this: > > > > %FABRIC-3-ERR_HANDLE: Reconfigure LC on fabric due to CRC error from slot > 6 > > > > In one week, i have 4 of these messages. > > > > Slot 6 is a SIP-601 containing 2 x SPA-10G. > > > > What could be the problem ? > > > > The "show controllers fia" do not show any problem. > > > > The "execute-on slot 6 show controllers fia" show this: > > > > Switch cards present: 0x1F > > Switch cards monitored: 0x1F > > 0 1 2 3 4 > > -------- -------- -------- -------- -------- > > los 0 0 0 0 0 > > state Off Off Off Off Off > > crc16 53989 0 0 0 0 > > xor error0 0 0 0 > > cell drops1020 1020 1020 1020 > > > > > > IOS=c12kprp-p-mz.120-32.SY6.bin > > > > > > Thanks. > > > > Regards, > > > > Antonio Soares, CCIE #18473 (R&S) > > amsoa...@netcabo.pt > > > > _______________________________________________ > > cisco-nsp mailing list cisco-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/