> From: sth...@nethelp.no >> Normally, hardware-forwarding boxes should never show significant CPU >> load. >> > With the exception of the old 3500XL series using 50% or more of the > CPU to drive the front panel LEDs :-)
Yes, a 3500XL... PCP-2000-IDF-3-2#show proc cpu | e 0.00.*0.00.*0.00 CPU utilization for five seconds: 55%/9%; one minute: 54%; five minutes: 53% PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 2 324 145 2234 0.20% 0.24% 0.07% 1 Virtual Exec 19 298827467 725645780 411 4.99% 3.38% 2.15% 0 LED Control Proc 20 22588231 6594172 3425 0.32% 0.28% 0.28% 0 Frank Aging 21 15080761451340714509 1124 12.28% 11.87% 11.73% 0 Port Status Proc or a 2924XL... NVA-CM-1#show proc cpu | e 0.00.*0.00.*0.00 CPU utilization for five seconds: 30%/7%; one minute: 32%; five minutes: 33% PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 2 333 84 3964 0.00% 0.30% 0.07% 1 Virtual Exec 19 87700963 110937038 790 1.12% 3.35% 3.93% 0 LED Control Proc 21 361698432 203598505 1776 12.20% 11.28% 11.21% 0 Port Status Proc Jeff _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
