On Mon, 11 Jan 2010, Keith wrote:
But now I just realized just change the IP address on the ATM
sub-interface on the router and get the customer to renumber to the new
IP. No changing of PVC's needed.
There is another faste interface on the 7204 that would connect to a new
switch which goes out to a new upstream that the new block of IP's would
route and would allow customers to use the old IP blocks until we get them
to renumber.
Just add the new address as a primary and make the old address secondary.
Then when the customer is done renumbering just delete the secondary
address.
Antonio Querubin
808-545-5282 x3003
e-mail/xmpp: t...@lava.net
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
