Hello Ian: > -----Original Message----- > From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp- > boun...@puck.nether.net] On Behalf Of Gert Doering > Sent: Wednesday, January 13, 2010 1:19 AM > To: Ian Henderson > Cc: cisco-nsp@puck.nether.net > Subject: Re: [c-nsp] DS3 over STM1 > > Hi, > > On Tue, Jan 12, 2010 at 11:15:10PM +0800, Ian Henderson wrote: > > The new carrier has provisioned a 45Mbit clear channel service with a > DS3 > > at the remote site, and a channelised STM1 at the head office. I > can't > > seem to find a combination of router/card/mux to make this work. > > I'd ask the carrier to deliver clear channel DS3 on both ends. > > After all, that's what you ordered ("give us a DS3!"), no? > > gert > --
I'm not sure what platform you have, but there are channelized STM-1 cards for the 7200, 7500 and the 1000 series routers. You should be able to peel off a single DS-3 on the STM-1 and get the right framing and signaling to carry it through to your other location. Google "channelized stm-1 cisco" Regards, Mike _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/